P205-SavantAA | Adapter, Super Lamp Power Supply to GBC SavantAA

by Photron
$99.00

Photron's P205-savantAA is designed for use in our P200 Super Lamp power supply for GBC's SavantAA AAS instruments.

Designed for P800S 3 Volt superlamps

Installation Instructions

Objective: To connect a Photron Super lamp to a GBC SavantAA AAS.

Materials:

  • GBC SavantAA AAS
  • Photron 10 volt super lamp power supply
  • P200-10V Photron P205-SavantAA adapter kit

Procedures: Warning: When powered, lamp circuitry runs at high voltage.

  1. Turn off power to instrument and unplug.
  2. Remove top and left covers from AA
  3. Locate 10 way connector with a single red wire, yellow wire and blue wire attached.
  4. Connect the 10 way connector on the adapter lead to this mating connector on the turret loom. Cover with heat shrink tubing.
  5. Solder the red wire from the adapter lead onto one of the red wires which connect to the 10 way connector which has 2 adjacent red wires at one end.
  6. Locate the black wire from the 10 way connector on the turret loom.
  7. Cut this black wire 250mm from the 10 way connector.
  8. Solder the black wire from the adapter lead to the connector end of the black wire on the turret loom.
  9. Solder the blue wire from the adapter lead to the other end of the black wire on the turret loom which was previously cut..
  10. Replace covers

Lamp position 1 will only operate as a Super-lamp.

You recently viewed

Clear recently viewed